How do I refill Brother LC970 Ink Cartridges for model 135c?

The cartridge sits in a case,which you will need to flip open like a book.Before you do this you will need to cut the label at the bottom as it is preventing the case from opening.





Flip open the cartridge casing (shell).





Remove the cartridge from the casing (shell).





There is a round hole (well) in the top of the cartridge. Inside the hole or well is a rubber stopper. Use a thumb drill and drill through the rubber stopper.


Note: Do not bump or press the ';pressure release button';.





Put the filling needle onto the syringe and fill the syringe with ink.





Insert the needle through the drilled stopper hole and into the cartridge body. Be sure the needle (even though it is blunt) does not press up against the bag and punctures it.





S-l-o-w-l-y inject 10cc of ink into the cartridge bag.





Remove the syringe with needle and Seal the hole using the candlewax.





Place the cartridge back into it's casing (shell) and use a piece of tape to hold the two sides of the casing (shell) together.





Replace the cartridge(s) and run 1 - 3 cleaning cycles as per printer instructions.How do I refill Brother LC970 Ink Cartridges for model 135c?
Buy the ink and follow the instructions on the packaging!





Surely you could have worked that out all by yourself!How do I refill Brother LC970 Ink Cartridges for model 135c?
but they r not up to satisfaction.